Passat Diode-Pumped Solid State Lasers



Print Friendly

Our Products

Diode-Pumped Solid State Lasers, Faraday Rotators, Faraday Isolators

Our Sevices

Laser Micromachining, Laser Rental

Contact Us

Feel free to contact us for details.

Picosecond DPSSL Compiler 532 top

Picosecond Diode-Pumped Solid-State Lasers

High-Energy DPSS Picosecond Lasers

Passat Picosecond DPSS lasers are powerful sources of short light pulses with excellent stability from pulse to pulse. The lasers operate at 1064 nm, 532 nm, 355 nm, 266 nm and 213 nm wavelengths providing the highest UV energy density available from a commercial laser.


  • 6-8 picosecond pulse width
  • >500 µJ /pulse (Compiler @1064nm)
  • Upgradable to >2.3 mJ/pulse (Compiler @1064nm)
  • 400 Hz standard, upgradable to 1 kHz
  • TEM00 mode
  • Air cooled
  • External triggering or computer controlled, including burst mode


  • Micromachining (diamonds, glass, metals, ceramics)
  • Photo ionization
  • Laser-induced breakdown spectroscopy (LIBS)
  • Laser ablation, fragmentation and destruction
  • Photolithography
  • Single and double photon Laser-induced fluorescence (LIF)
  • Raman spectroscopy
  • Time resolved spectroscopy
  • Remote sensing
  • Medical and biomedical research
Sub-nanosecond Laser Wisconsin-1

Sub-Nanosecond Diode-Pumped Solid-State Lasers

High-Energy DPSS Sub-Nanosecond Lasers

Q-switched DPSS lasers featuring high-peak-power, rugged, turnkey, sub-nanosecond units with output at any or all of the wavelengths: 1064 nm, 532 nm and 266 nm. The relatively short pulse length and high peak power make the SUB-Naples family particularly suitable for use in LIDAR, km-scale laser ranging (at 1064 nm), micromachining, mass spectrometry and other applications.


  • 6 nanosecond pulse width
  • >1.4 µJ /pulse (Sub-Naples @1064nm)
  • 400 Hz standard
  • TEM00 mode
  • Air cooled


  • Micromachining (diamonds, glass, metals, ceramics)
  • distance measurements
  • remote sensing
  • bio-medical application
  • scientific research
Laser Cutting Copper 200

Laser Micromachining

Material Processing using proprietary High Power DPSS Picosecond UV lasers.

We are the only company in the world that can:

  • Drill micro-holes with diameter 10 µm in 1 mm thick glass.
  • Cut relatively thick glass (up to 2 mm thick) with 10-50 µm wide cuts of any configuration.