Passat Diode-Pumped Solid State Lasers

+1-905-695-1088 email: sales@passatltd.com

Menu
Sub-Nanosecond DPSS Laser: Colibri-532 (1064) Diode-Pumped Solid-State Laser

  • Home
  • Sub-nanosecond dpss laser: colibri-532 (1064) diode-pumped solid-state laser

Colibri-532 (1064)

Turn-key All Solid-State Diode-Pumped Compact

Sub-Nanosecond Lasers

The Colibri series of solid-state lasers from Passat provide the sweet-spot of laser performance parameters in a turn-key laser head package with small dimensions – well suited for OEM installation into variety of instruments and setups.

The laser delivers short pulses at repetition rates of 70 to 100 kHz and average power up to 40 mW (1064 nm) or 20mW (532nm).
Measuring only 100x81x63 mm the laser head can be front or bottom mounted, is air-cooled and thermally stabilized and requires only one electrical connection to the small power supply.

If shorter wavelengths are required, the SubNaples MINI can deliver down to 213 nm (fifth Nd-YAG harmonic) in slightly larger laser head package.

Subnanosecond DPSS Laser Colibri-532

FEATURES

  • 0.5 nanoseconds pulsewidth
  • Energy output (1064 nm): 0.6µJ (70 kHz) to 0.4µJ (100 kHz)
  • ~70-100 kHz repetition rate
  • TEM00 mode
  • Air cooled

APPLICATIONS

  • Micromachining (diamonds, glass, metals, ceramics)
  • Distance measurements
  • Remote sensing
  • Bio-medical application
  • Scientific research

 Specifications*

Colibri-532 (1064)

Repetition Rate ~ 70 kHz to 100 kHz
 Wavelength : 1064nm or 532nm
 Energy Output (1064 nm)  0.6µJ (70 kHz) to 0.4 µJ (100 kHz)
 Energy Output (532 nm)   0.3µJ (70 kHz) to 0.2 µJ (100 kHz)
Average power 40 mW (1064 nm), 20 mW (532 nm)
 Pulse width (at 1064 nm) ~ 500ps (532 nm)
 Q-switch Passive
Divergence Close to Diffraction Limited
 Beam profile Close to TEM00 mode
 Beam Diameter at the laser exit (at 50% fluency) ~ 0.4 mm
 Output Beam pointing stability (std. dev, 1 hour at thermal equilibrium) Better than 0.2 mrad
 External control Connector for TTL enable input for +4 +/-1V, into 1 kΩ
(Laser pumping is ON at high TTL level, no modulation accepted on trigger input)
 Electrical power (Option 1) ~ 100-240 VAC, 47-63 Hz, single phase
Power consumption: < 30 W
 Electrical power (Option 2) +5 VDC
Power consumption: < 26 W
 Warm Up time less than 10 minutes
 Operating temperature and humidity 18-33° C; 10-85 %

Delivery set

  • Integrated Laser Head with Power Unit
  • Power Cable
  • CD with Manual and Control Application
  • Test Record

Laser Head Dimensions

LxWxH: 100mm X 81mm X 63mm
Mounting: 4x 10-32 UNF x12mm-deep threaded-hole pattern on front face of laser head.
For output aperture position, please see drawing below (subject to change, please contact us).
Power/data connector on laser head: D-SUB DB-25 or HD44
Recommended length of umbilical cord from PSU to laser head <1m (to reduce Ohmic losses). Dimensions of PSU box: TBD (depends on electrical power option above) Subnanosecond DPSS Laser Colibri-532.PDF

Warranty

1 year for all parts and labor excluding the laser pump diode. The pump diode is warranted for the lesser of 1 year or 5*109 pulses.


*The specifications are preliminary based on the parameters of a bench-top prototype model.