Passat Diode-Pumped Solid State Lasers


Sub-Nanosecond DPSS Laser: Sub-Naples 10

Print Friendly

Sub – Naples 10

Turn-key All Solid-State Compact

Sub-Nanosecond Lasers

The Sub-Naples-10 diode-pumped solid-state laser is a turn-key high-peak-power, rugged, turnkey, sub-nanosecond unit with output at 1064 nm. The relatively short pulse width and high peak power make the Sub-Naples family particularly suitable for use in LIDAR, km-scale laser ranging, micromachining, mass spectrometry and other applications.


  • 0.5 nanoseconds pulsewidth
  • 10 mJ /pulse (Sub-Naples 10 @1064nm)
  • 400 Hz standard
  • TEM00 mode
  • Air cooled


  • Micromachining (diamonds, glass, metals, ceramics)
  • Distance measurements
  • Remote sensing
  • Bio-medical application
  • Scientific research


SubNaples-10 1064 (532/355/266/213)

Repetition Rate 20 Hz or less
 Wavelength 1064 nm
 Energy Output (at 10 Hz)  10 mJ
 Pulse-to-pulse standard deviation (at 100 Hz) <1% available upon request
 Pulse width (at 1064 nm) ~ 0.5 ns
 Q-switch Passive
Divergence Diffraction Limited
 Beam profile Gaussian
 Beam Diameter at the laser exit ~ 2 mm
 Output Beam pointing stability < 0.5 Diffraction Limit
 External control Connector/pin for TTL trigger input or +4 +/-1V, into 1 kΩ
 Electrical power ~ 100-240 VAC, 47-63 Hz, single phase
 Power consumption  < 150 W
 Warm Up time < 5 minutes
 Operating temperature and humidity 20-27 C; 10-80 %
 Compliance CDRH, CE

Delivery set

  • Integrated Laser Head with Power Unit
  • Power Cable
  • CD with Manual and Control Application
  • Test Record

Laser Output Beam Profile

Sub-nanosecond DPSS Laser beam


1 year for all parts and labor excluding the laser pump diode. The pump diode is warranted for the lesser of 1 year or 5*109 pulses.